[Jan-2022 Newly Released] 300-610 Exam Questions For You To Pass
Cisco 300-610 Exam: Basic Questions With Answers
NEW QUESTION 15
Which two automation requirements can be met by using Puppet? (Choose two.)
- A. Enable clients to pull changes to configuration files.
- B. Provide support for writing new modules in Python.
- C. Enable one-off infrastructure changes to be performed manually.
- D. Push configuration updates immediately to servers.
- E. Enable clients to pull changes without installing an agent.
Answer: A,D
NEW QUESTION 16
Drag and drop the feature descriptions from the left onto the correct UCS Fabric Interconnect modes on the right.
Answer:
Explanation:
NEW QUESTION 17
A engineer wants to eliminate the manual process of checking the system hardware and firmware against a specified hardware compatibility tool. The tool must be able to manage an extensive list of devices including cisco HyperFlex, MDS, and Nexus switches. The tool must manage hardware in multiple data centers so it should be deployed on public cloud infrastructure. Which tool meets these requirements?
- A. Cisco data center network manager
- B. Cisco UCS director
- C. Cisco intersight
- D. Cisco tetration
Answer: C
NEW QUESTION 18
Which authentication software natively runs within the CLI of Cisco NX-OS devices?
- A. Ansible
- B. Chef
- C. Python
- D. Puppet
Answer: A
Explanation:
Section: Automation Design
NEW QUESTION 19
A client in a commercial building installs a Cisco blade server in the multitenant Cisco UCS blade infrastructure.
To cut operating costs, the client's data center is shared with other organizations. The client asks an engineer to prevent third parties from accessing their equipment and from accessing BIOS-related information when booting a server.
Which two policies must be used to meet these requirements? (Choose two.)
- A. quiet boot
- B. CDN control
- C. post error pause
- D. front panel lockout
- E. ASPM support
Answer: A,D
NEW QUESTION 20
When planning to deploy a load-balancing service as a managed node, which ACI configuration must be included?
- A. inline load-balancing device
- B. ITD
- C. Layer 4 to Layer 7 device package
- D. BGP ECMP
Answer: C
Explanation:
Section: Network Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/1-x/ACI_Best_Practices/ b_ACI_Best_Practices/b_ACI_Best_Practices_chapter_0110.html
NEW QUESTION 21
A network engineer must select a high availability feature for their data center. The solution must ensure network resilience, reduce network instability for Layer 3 routing protocols, and meet these requirements:
The device must notify its neighbors when the control plane is undergoing a restart.
The solution must suppress routing flaps in case of stateful switchovers.
Which solution must be implemented?
- A. NSF
- B. HSRP
- C. ISSU
- D. BFD
Answer: A
NEW QUESTION 22
Which two statements describe Ethernet switching mode on Cisco UCS 6100 Series Fabric Interconnects?
(Choose two.)
- A. STP runs on the uplink ports of each VLAN, as defined by PVSTP+.
- B. STP runs on the uplink ports of each VLAN, as defined by MSTP.
- C. The STP parameter configuration is unsupported.
- D. STP runs on the server ports.
- E. The STP parameter configuration is supported.
Answer: A,C
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/unified-computing/ whitepaper_c11-701962.html
NEW QUESTION 23
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster?
(Choose two.)
- A. DRS
- B. HA
- C. VSS
- D. VDP
- E. FT
Answer: A,B
NEW QUESTION 24
Which approach splits a pair of clustered fabric interconnects into two standalone devices?
- A. Erase the configuration of both fabric interconnects.
- B. Run the disable fips-mode command on each fabric interconnect.
- C. Run the connect local-management command on each fabric interconnect.
- D. Unplug the Layer 1 and Layer 2 interfaces between the devices.
Answer: D
NEW QUESTION 25
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. end-host mode feature on the Cisco UCS Fabric Interconnects
- B. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- C. NPV feature on the Cisco MDS Series.
- D. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- E. NPIV feature on the Cisco MDS Series
Answer: C,E
NEW QUESTION 26
An engineer must build a VXLAN flood-and-learned network. The customer requires the solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees. Which technology meets these requirements?
- A. MVPN
- B. Bidirectional PIM
- C. PIM sparse mode
- D. PIM SSM
Answer: B
NEW QUESTION 27
An engineer manages hundreds of Cisco Nexus Series and 9000 Series Switches that are installed at several data centers and wants to use one of the built-in automation tools of the Cisco NX-OS Guest Shell to automate daily activities. The engineer requires a tool that uses imperative language, has extensive support, and is object-oriented. Which automation tool should be used to meet these requirements?
- A. Perl
- B. Bash
- C. YAML
- D. Phython
Answer: D
Explanation:
Python is object-oriented and imperative language.
YAML is declarative.
NEW QUESTION 28
What is a design consideration when implementing FSPF?
- A. Routes are based on the domain ID.
- B. Routes are based on the distance vector protocol.
- C. FSPF runs on a per-chassis basis.
- D. FSPF runs only on F Ports.
Answer: A
Explanation:
Section: Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ fabric/nxos/cli_fabric/fspf.html
NEW QUESTION 29
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION 30
The end users report issues with datastore reachability between the newly installed virtual machines (VMs) and the storage array. The VMs are deployed on a Cisco C-Series server, directly connected with Cisco Nexus 5672UP switches over FCoE VLAN. The data traffic on VLAN 99, which is designated as a native VLAN, reaches its default gateway, but FCoE VLAN 99 fails to access the datastore. Which action resolves the problem?
- A. Configure the FCoE VLAN traffic on a separate interface from any other VLANs that traverse the network.
- B. Configure the FCoE VLAN in the VSAN database before including it in the trunk port.
- C. Implement FCoE traffic on VLAN 10 and data traffic on VLAN 99.
- D. Implement host-facing FCoE ports as spanning-tree port type edge.
Answer: C
NEW QUESTION 31
Which two configurations are available by using a service profile template in Cisco UCS Manager? (Choose two.)
- A. number of vHBAs
- B. UUID assignment
- C. target server
- D. VXLAN membership
- E. ARP entries
Answer: A,B
Explanation:
Section: Automation Design
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/ b_UCSM_CLI_Configuration_Guide_2_2/b_UCSM_CLI_Configuration_Guide_2_2_chapter_0100000.html
NEW QUESTION 32
Refer to the exhibit.
A high-availability setup for iSCSI is designed with the host running iSCSI multipath software. Each IP storage port on the MDS switch exports the same two Fibre Channel target ports with different iSCSI target names.
In this design, how many iSCSI sessions are created from the host so that recovery occurs if any component fails?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 33
Which two automation requirements can be met by using Puppet? (Choose two.)
- A. Enable clients to pull changes to configuration files.
- B. Provide support for writing new modules in Python.
- C. Enable one-off infrastructure changes to be performed manually.
- D. Push configuration updates immediately to servers.
- E. Enable clients to pull changes without installing an agent.
Answer: A,D
Explanation:
Section: Automation Design
Explanation/Reference: https://www.cisco.com/c/dam/en/us/products/collateral/servers-unified-computing/ucs-c-series- rack-servers/whitepaper_c11-740103.pdf
NEW QUESTION 34
Refer to the exhibit.
A Cisco UCS chassis that has two IOMs is discovered. The chassis discovery policy creates a fabric port channel. What is the result of this policy?
- A. Cisco UCS Manager creates two separate fabric port channels.
- B. Each uplink that connects an IOM is configured as a discrete link.
- C. The port channel is disabled until an administrator enables it manually.
- D. Cisco UCS Manager creates a single fabric port channel.
Answer: A
NEW QUESTION 35
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION 36
A network engineer must design a Cisco HyperFlex solution based on these requirements:
* two clusters in the main data center consisting of five HyperFlex nodes
* one edge node for the remote branch
* cluster nodes that use one rack unit of space
Which two devices should be used in the remote branch cluster for this design? (Choose two.)
- A. Fabric Interconnect 6300
- B. UCSB B200
- C. HX220C
- D. HX240C
- E. Gigabit Ethernet Switch
Answer: C,E
NEW QUESTION 37
An engineer must interconnect two geographically separated data centers. The service provider offers a Layer 2 Metro Ethernet link. The strict security policy requires that the information that is shared between two sites must be sent encrypted. The application deployed between two sites requires a line-rate throughput regardless of the packet size and speed.
Which solution meets these requirements?
- A. L2TPv3
- B. MACsec
- C. L2TPv2
- D. IPsec
Answer: B
NEW QUESTION 38
......
Which Skills Are Covered in the Exam?
This exam is an extensive one and tries to validate the test-takers’ skills in a broad range of topics. The prime focus is on data center infrastructure-related areas such as automation of networks, networking computing, and storage management. The details of the content are as follows:
1. Network Design
- Weightage allotted – 35%
This is the most widespread domain in Cisco 300-610 syllabus. It tries to educate the learner about evaluating options for Layer 2 and layer 3 connectivity. Topics like endpoint mobility, convergence, service insertion, IP mobility, and redundancy are covered here as well. In addition, the section requires candidates to be able to be knowledgeable about the details related to evaluating data center technologies like vPC, skills in assessing the available options for device & routing virtualization, such as VDC and VRF, and evaluating in-band and out-of-band options for management as well as work with redundancy.
New 2022 Realistic Free Cisco 300-610 Exam Dump Questions & Answer: https://exam-hub.prepawayexam.com/Cisco/braindumps.300-610.ete.file.html